AAA Illuminates Dangers of Driving with Cloudy Headlights - BodyShop Business

AAA Illuminates Dangers of Driving with Cloudy Headlights

New research from AAA reveals that clouded or yellowed headlights generate only 20 percent of the amount of light that new headlights do, leading to dangerous nighttime driving conditions.

New research from AAA reveals that clouded or yellowed headlights generate only 20 percent of the amount of light that new headlights do, leading to dangerous nighttime driving conditions. This decrease is caused by sunlight damage to protective plastic coatings, resulting in discoloration that considerably diminishes the headlight’s ability to provide adequate light on dark roadways. With 50 percent of crashes occurring at night, AAA urges drivers to check their headlights for signs of deterioration and invest in new headlights or, at a minimum, a low-cost service to boost the safety of driving after dark.

“Walk through any parking lot and it is evident that deteriorated headlights are a problem for most vehicle owners,” said Greg Brannon, director of Automotive Engineering and Industry Relations for AAA. “Headlights on the road in the U.S., even when new, don’t produce a sufficient amount of lighting, so any reduction in performance is a real safety issue.”

AAA examined the impact deterioration can have on the amount of light produced by conducting research using an accredited laboratory to test headlights from two popular sedans, approximately 11 years in age. Results from the degraded headlights were measured against new headlights to quantify the amount of light produced for each. All testing was done in accordance with the Federal Motor Vehicle Safety Standard 108 as set forth by the Department of Transportation (DOT).

Research revealed that deteriorated headlights, when used on low beam, provided just 22 percent of the amount of light a new headlight does when operating at full capacity. AAA also examined the effects that replacing or restoring a headlight can have on improving the amount of light produced. Replacing headlights with original equipment manufacturer parts is the most effective method to restore light output back to 100 percent.

AAA states that aftermarket parts also performed well, restoring light output between 83 and 90 percent, however these did fail to meet certain requirements for light intensity and were found to be more likely to produce glare for oncoming traffic. Restoring headlights, while the most cost-effective option, offered less of an improvement in light output than replacement. Professional and DIY restoration returned light output back to approximately 70 percent. Both restoration methods, however, produced more glare than is acceptable, according DOT criteria.

Compounding the problem of driving with deteriorated headlights is the fact that U.S. headlights have significant shortcomings. Previous AAA research found that halogen headlights fail to safely illuminate unlit roadways at speeds as low as 40 mph, with high-beam settings offering only marginal improvements. Even the most advanced headlights tested illuminated just 40 percent of the sight distances that the full light of day provides. By not maintaining headlights, drivers are unknowingly operating in dangerously dim conditions.

“Driving at night with headlights that produce only 20 percent of the light they did when new, which is already subpar, is a risk drivers shouldn’t take,” said Brannon. “Especially when there are convenient and inexpensive solutions that can dramatically improve lighting performance.”

Unlike batteries or tires, most drivers are not in the habit of routinely inspecting their headlights. AAA suggests drivers check their headlights for changes in appearance such as yellowing or clouding and if the bulb is difficult to see, it is time to have the lenses replaced or restored as soon as possible. AAA recommends replacement since this method offers the most improvement in the amount of light produced.

You May Also Like

CCG Acquires Square One Systems, Coyote Vision Group

For over 40 years, Square One Systems has delivered effective solutions to collision repairers centered around analytics, collaboration and accountability.

Certified Collision Group, Inc., (CCG) announced it has acquired Square One Systems and Coyote Vision Group. 

“CCG is excited to welcome Square One and the Coyote Vision Group to our portfolio," said Michelle Sullivan, CEO of CCG. "Square One has demonstrated over 40 years of innovative leadership in delivering effective solutions centered around analytics, collaboration and accountability. Performance-driven groups enhance top-performing, like-minded operators, ultimately elevating the entire industry. We are delighted to continue supporting Coyote Vision Group and Square One Performance group members as they optimize business performance, seize opportunities and foster community growth."

Keene Auto Body: Since 1928

Ensio Piispanen immigrated from Finland to the U.S. and founded Keene Auto Body in 1928.

AASP/NJ Announces Winners of NORTHEAST Show Bodywork Bowl

The competition featured 70 competitors showcasing their skills in welding, painting and estimating.

Consolidator Report

Consolidation news from the week of April 15.

People on the Move

Recent personnel news that has appeared on bodyshopbusiness.com.

Other Posts

Top 5 Stories of the Week

A recap of the top five stories on bodyshopbusiness.com during the week of April 15.

Crash Champions Appoints Industry Veteran to Board of Directors

Barrett Callaghan brings two decades of industry experience to Crash Champions from Shift Technology and CCC Intelligent Solutions.

Marine Corps Veteran Joins Maaco Family

Quincy Land, owner of the newly opened Maaco in O’Fallon, has 20 years of dedicated service as a gunnery sergeant in the Marine Corps.

I-CAR Recognizes Industry Excellence with Chairman’s Awards Presentation

Collision repair leaders Lou DiLisio, Nick Notte, Tim O’Day and Ford Motor Company honored for outstanding contributions.