New Forward Lift F10 Two-Post Lift Combines Versatility with Economy

New Forward Lift F10 Two-Post Lift Combines Versatility with Economy

The F10 two-post lift comes with one three-stage arm and one two-stage arm on each column, enabling technicians to properly lift a wide range of cars, light trucks, SUVs and vans.

forward-lift-f10The new Forward Lift F10 10,000 lb. capacity two-post lift gives shop owners a versatile two-post lift, designed to service a wide variety of vehicles for a low purchase price. The F10 two-post lift comes with one three-stage arm and one two-stage arm on each column, enabling technicians to properly lift a wide range of cars, light trucks, SUVs and vans.

Third-party tested and certified by the Automotive Lift Institute (ALI) to meet industry safety and performance standards, the Forward Lift F10 two-post lift is available through most national auto parts retailers, as well as from more than 100 Forward Lift authorized distributors across North America.

Symmetric lifting is preferred for most trucks, SUVs and vans because it centers the vehicle load between the lift’s columns to maximize lifting capacity. Lighter cars can be better serviced using an asymmetric lift. This positions the vehicle toward the rear of the bay to prevent its doors from contacting the lift’s columns when opened, and provides easier access to the interior of the car and its under-dash components.

The Forward Lift F10 has one three-stage arm and one two-stage arm on each column, which lets technicians make the appropriate configuration choice for each vehicle. The rear arm has a maximum reach of 58 inches toward the back of the vehicle, while the shorter front arm can be angled toward the middle of the bay. This asymmetric-like setup supports the vehicle’s center of gravity and places the vehicle’s doors clear of the lift’s columns. For symmetric lifting of larger vehicles, the technician simply shortens the rear arm and angles the front arm more toward the front of the bay.

The F10 features Forward Lift’s unique Direct-Pull Lift Technology, which replaces common push cylinders in the lift columns with direct-pull cylinders. This design protects the cylinder rod inside the carriage when lowered, and inside the cylinder housing when raised. This technology also provides the best mechanical advantage against side loading, one of the most common causes for cylinder leaks.

Additional features on the Forward Lift F10 two-post lift include a single-point lock release for easy lowering of the vehicle, low-profile 3-5/8 inch rubber-pad swivel adapters, and extra height extensions (3-1/2 and 5 inches) for reaching vehicle manufacturer-recommended pick-up points.

For more information about the new Forward Lift F10 two-post lift, visit www.forwardlift.com/Car-Lifts/2-Post-Lifts/F10-Two-Post-Lift/, contact your local Forward Lift distributor or call (800) 423-1722.

You May Also Like

Snap-on Unveils New Speed Demon EPIQ 68″ Roll Cab

The new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68″ Roll Cab features next-level organization, durability, security and mobility.

Snap-on has unveiled the new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68" Roll Cab, which features next-level organization, durability, security and mobility. Plus, the exclusive Speed Demon emblem represents everything enviable about working in the industry that keeps the world moving.

“The Speed Demon’s exclusive badging features an intricately detailed skull intertwined with pistons and an engine, symbolizing speed and the rebellious spirit that comes with being part of the automotive and heavy-duty worlds that combine high-level skills with high-level power,” says Angelo Gargano, product manager for Snap-on. “The fusion of skull and pistons evokes a sense of raw energy and daring, while the meticulous craftsmanship of this roll cab reflects both techs’ and Snap-on’s dedication to quality and innovation.”

Florida Pneumatic Releases AIRCAT 6335 Engraving Pen

The AIRCAT 6335 Engraving Pen features a carbide stylus and powerful 1/8” stroke piston design for consistent and trouble-free operation.

Hunter to Exhibit New HawkEye XL Aligner at MATS

New commercial alignment system offers speed, versatility and ease of use.

Dent Fix Introduces New Soft Shock Mallet

The new DF-SM76 soft-shock mallet can apply a strong striking force and avoid damaging or scratching parts.

KECO Body Repair Products Unveils New Products at MTE 2024

KECO unveiled the K-Power Lateral Tension Tool, HEMI Tabs and some new knockdowns at the 2024 Mobile Tech Expo.

Other Posts

Snap-on Under Hoist Stands Save Techs Time

New UHS1500 and UHSL1500 eliminate the need for constant cranking.

BendPak’s Full-Rise Scissor Lift Perfect for Shops with Little Space 

SP-7XE scissor lift lays flat and raises a vehicle six feet with open center below.

PPG Launches AdjustRite Repair Management Tool

The AdjustRite tool is the latest feature of the PPG AdjustRite  commercial estimating system, which provides enhanced productivity for commercial vehicle repairs.

Snap-on Introduces Two New Designs of Locking Pliers

The two innovative designs feature aggressive teeth and a longer nose for increased accessibility in tight workspaces.