You searched for aerosol blank - Page 2 of 2 - BodyShop Business
Equipment Needed for Waterborne Conversion

Transitioning to waterborne basecoats will require obtaining new equipment and retrofitting some existing equipment. Are you prepared? Part 2 of a three-part series on waterborne paint.

Ford Offers New Corrosion Protection Recommendations

From I-CAR Service information from Ford Motor Company states that corrosion protection needs to be restored whenever it is necessary to sand or grind through painted surfaces or E-coat, or when bare metal repairs are performed. Recently, Ford changed their corrosion protection product recommendations for undercoatings and panel backsides. New Corrosion Protection Products Until recently,

EPA Issues Final Spray Paint VOC Rules

The U.S. Environmental Protection Agency (EPA) published final rules on March 24 that establish restrictions for the use of volatile organic compounds (VOC) in aerosol spray paints. Similar to the regulations in place in California, the new rules are reactivity based, whereby the VOCs are regulated by how likely the compounds are to form ground-level

No Scuff ’n Shoot Here

The mindset that car refinishing is easy seems to be spreading throughout the industry. But there are no shortcuts to perfect paint jobs, and thorough prep work is essential to a lasting, quality repair.

Out of Retirement: Full-framed Vehicles

Just when you thought they were gone for good, MJ, bell bottoms and full-framed vehicles are back. Though Jordan can still score 40 points per game and bell bottoms are still … scary, today’s full frames aren’t the same as the ones produced in the past. And the repair procedures aren’t the same either. by

Reducing Hazardous Waste

Managing waste should be done with the same care and attention to detail as any other integral part of your business because, after all, it affects your bottom line.