BodyShop Business Staff Writers, Author at BodyShop Business - Page 1548 of 1641
Rechargeable Orbital

This rechargeable, lightweight orbital waxer  allows a mobile detailer to polish and wax vehicles without the need for electricity or a generator. It has a 10” bonnet surface for fast coverage and a 5-oz. polish or wax reservoir that “pumps” the chemical on to the vehicle surface as the tool is operating, eliminating the need

Ultimate Steam Clean and Prep Unit

The portable Ultimate-X steam clean and prep unit is designed for cleaning and phosphate treatment prior to paint or powder coating applications. And it has more output at less amp draw than ever seen on the market. Visit www.powder-x.com.  

Consistent Cures

IRT mobile curing units and overhead track systems come with the IRT XLNC sensor kit, the only one on the market with built-in sensors including: a laser pointer, a distance sensor to set optimum distance from the panel, and a temperature sensor that reads the temperature of the coating, eliminating any possibility of overheating and

Easy Paint Removal

SodaBlast Systems is a non-abrasive paint and coating removal method which can be safely used on almost all surfaces and will not warp or etch metal, scratch chrome or damage glass. It’s also environmentally friendly, water soluble and preserves the integrity of the metal with no ‘signature” on the surface. Visit www.sodablastsystems.com or call (800)

Strip Away Sealers

Scuff Stuff’s water-soluble cleaners strip away waxes, sealers and dirt while super-fine abrasives create a consistent surface profile that helps coatings spread flatter and bond more securely. Use them on hard-to-reach areas (around door locks, under seals and door jambs) and to clean and abrade urethane bumpers.

Reduce Energy Costs

FSCURTIS Masterline Duplex Reciprocating ULTRA PACK Compressor reduces energy costs with alternating compressor technology. It has all the options you need: air-cooled aftercooler, magnetic motor starter, dual control, low oil level shutdown, automatic tank drain, tank isolator pads. Horsepower ranges from 15 to 30, and it comes factory oil filled with a five-year limited warranty.

Sanding Tools

The Finish 1st™ Automotive Finishing System features sandpaper products and tools to grind, sand, finish and feather. Wet and dry sandpapers are available in a variety of sizes and shapes. Call (800) 255-4748 or visit www.gofinishfirst.com.  

Open Locked Doors Easily

The BigEasy Loop (P/N 32903) assists technicians in using the BigEasy to open locked cars. The BigEasy Loop snaps on to any of the BigEasy Lockout Tools to pull door handles and window cranks during the door unlocking process. It’s made from low density polyethylene which provides a strong but flexible tool that can adapt

Strong Thermoplastic Repairs

The E-Z Weld Model 2.0 Hot Air Welder for thermoplastics repairs made in the USA features a precise air regulator for ultimate air control. A “push-on” temperature control switch allows for easy adjustment and repeatability. A sturdy metal control box, heavy-gauge welding stand and a selection of plastic welding rod are included. The 550W element

No Prying Needed

The Auto34 leverless tire changer was on the job when 650 Nissan-USA dealers were introduced to the 2009 GT-R model at Las Vegas Motor Speedway. Performance Racing employed the Auto34 to keep the cars riding on fresh rubber. It’s designed to quickly and easily service these types of performance tire and wheel combinations without difficulty.

High-Production Clear Coat

The new Permasolid HS Optimum Clear Coat 8600 is easy to apply, highly productive, and has an excellent build and brilliant finish. Apply  in only one-and-a-half coats with only a 15-minute bake time. This high solids National Rule clear offers significantly greater square foot coverage compared with most other clears and works with the new

Gain Welding Efficiency

Cebotech’s model no. 3664 220V three-phase 60-amp inverter welder features a new programmable design, intelligent welder control, innovative gun design, more power (up to 14,000 amps), more squeeze force (up to 1,325 lbs.) and efficient power usage. It welds all new metals and is fully water-cooled. Visit www.cebotechusa.com.