BASF Automotive Refinish Solutions to Exhibit at SEMA - BodyShop Business

BASF Automotive Refinish Solutions to Exhibit at SEMA

BASF Automotive Refinish Solutions announced that it will exhibit at the 2009 Specialty Equipment Market Association (SEMA) Show, Nov. 3-6 in Las Vegas, Nevada, in booth 21442.

BASF will showcase paints from its Glasurit and R-M automotive refinish systems. Chip Foose, nationally known automotive designer and owner of Foose Design, will be on hand to promote the his Foose Signature Line of BASF Colors available in R-M solventborne basecoat and Glasurit waterborne basecoat.

On Tuesday Nov. 3, at 11:10 a.m., Peter Klut, host of television show, “Dream Car Garage,” will unveil the 1970 Super Cuda that has been restored on air during the 2009 season of Dream Car Garage (www.dreamcargarage.com).  Klut will be available for an autograph session directly following the press conference.

Chip Foose, host of “Overhaulin’,” will be in the BASF booth for an appearance and autograph session to promote the Foose Signature Colors he designed for BASF on Thursday, Nov. 5 from 10-11 a.m.

In addition to the Dream Car Garage Super Cuda, BASF is featuring three additional cars: a Mitch Henderson 2010 Camaro, a Ring Bros. Ford Fairlane and a Stillen Nissan GT-R Targa.

Visit BASF Automotive Refinish Solutions in the Racing and Performance area of SEMA 2009, booth 21442 or visit www.basfrefinish.com.

You May Also Like

Body Bangin’: Easily Find and Add Non-Included Operations

Live from the Southeast Collision Conference, Micki Woods interviews Scott Ayers on the Blueprint Optimization Tool (BOT).

Micki Woods, master marketer for collision repair shops and owner of Micki Woods Marketing, is kicking off a series of daily podcasts from the Carolinas Collision Association's Southeast Collision Conference which took place April 18-19, 2023 in Doswell, Va. This series is sponsored by Lombard Equipment, which offers a premier line of automotive collision repair equipment for all your OEM certification needs.

Body Bangin’: Train Those Apprentices with Keith Egan of BeTag

Live from the Southeast Collision Conference, Micki Woods interviews Keith Egan of BeTag on developing your own techs to higher skilled positions.

Body Bangin’: Common Pitfalls When Buying Equipment

Live from the Southeast Collision Conference, Micki Woods interviews Kevin Lombard and Dave Caron of Lombard Equipment on the do’s and don’ts of buying equipment.

Body Bangin’: SE Conference Hot Takeaways with Blake Farley

Live from the Southeast Collision Conference, Micki Woods interviews Blake Farley of Relentless Collision, an MSO in North Carolina.

Body Bangin’: Bridging the Gap in Scan Tools with Joe Maitland

Live from the Southeast Collision Conference, Micki Woods interviews Joe Maitland of CAS on how his diagnostic scan tools bridge the gap between aftermarket and OE scan tools.

Other Posts

Body Bangin’: Stop Subletting Calibrations with Josh McFarlin

Live from the Southeast Collision Conference, Micki Woods interviews Josh McFarlin of AirPro Diagnostics on doing calibrations in-house.

Body Bangin’: The Biggest Opportunity with Frank Terlep

Live from the Southeast Collision Conference, Micki Woods interviews Frank Terlep of Opus IVS on why ADAS calibration is the biggest business opportunity the collision industry has seen in the last 20 years.

Body Bangin’: The Golden Rule Doesn’t Work with Mark Olson

Live from the Southeast Collision Conference, Micki Woods interviews Mark Olson of Vehicle Collision Experts on keys to understanding people.

Body Bangin’: Stop Estimating and Start Repair Planning

Live from the Southeast Collision Conference, Micki Woods interviews Michael Bradshaw on creating a thorough repair process.