News: Consolidator Report
The Equalizer Raptor has eliminated the need for manual-pumping forever by designing AirForce Constant Vacuum technology into the Raptor.
In the past, whenever you needed to attach a device to auto glass and begin cutting through urethane, you had to manually pump the vacuum cup to maximum pressure. Occasionally during the cutting process, you might have needed to continue to manually pump, based on the length of time the cup needed to stay on the glass in a specific location.
The Equalizer Raptor has eliminated the need for manual-pumping forever by designing the proprietary, extreme-weather-tested AirForce Constant Vacuum technology into the Raptor.
Simply power-on the Raptor, touch the vacuum cup to the glass and it will automatically secure itself in seconds. By the time you attach the ratchet to the Raptor, the vacuum cup has already created a completely secure seal to the glass and the Raptor will remain secure throughout the cut.
No need to turn the unit off when repositioning the Raptor, simply lift the pressure release tab at the edge of the vacuum cup, lightly place the Raptor where you want it and it will secure itself to the glass so you can begin your next cut.
Under normal environmental and fully charged operating conditions, the Raptor can remove up to 15 windshields before its battery system will need to be recharged. An LED indicator on the charger plug lets you know when the Raptor is ready for use. Full recharge time is usually less than two hours.
Pre-order the Raptor today at your local Equalizer Authorized Distributor.