Martin Senour Launches New Industrial Maintenance Coatings DTM Acrylic Enamel

Martin Senour Launches New Industrial Maintenance Coatings DTM Acrylic Enamel

The new coatings product is a high-gloss, 100-percent acrylic, waterborne, corrosion-resistant coating for light to moderate industrial use.

Martin-Senour-coatings

The Martin Senour Company has introduced its new Industrial Maintenance Coatings DTM Acrylic Enamel. It is a high-gloss, 100-percent acrylic, waterborne, corrosion-resistant coating for light to moderate industrial use. Designed for new construction, equipment or a variety of maintenance uses, Industrial Maintenance Coatings DTM Acrylic Enamel can be used directly over a variety of properly prepared substrates while offering a protective coating.

The new coatings product (series IM110) provides a number of features: it’s a low-VOC coating; offers chemical and corrosion resistance; provides adhesion and moisture resistance; and is fast-drying with low odor characteristics.

Suitable substrates for Industrial Maintenance Coatings DTM Acrylic Enamel include steel, iron, aluminum, galvanized steel, concrete, masonry, wood, zinc rich primers, cement board and fiber board. It’s recommended for use on a number of applications including ornamental iron, tanks and cylinders, steel fabricated parts, industrial, construction and farm equipment, metal buildings, piping, hand rails and select marine structures.

Available in 13 popular factory packaged colors (standard, safety and basic equipment), the coatings dry to the touch in 15 to 30 minutes and are easy to apply with either brush or spray application.

For more information regarding Martin Senour or its paint products, visit www.martinsenour-autopaint.com or call (800) 526-6704.

You May Also Like

New-Size Punching Dies for Bumper Hole Kit

Now you can punch perfect 27mm, 28.1mm, 29.3mm and 38.9mm sensor holes in plastic bumpers for Subaru, VW and others.

Killer Tools has introduced a new product that is an extension to their ART251 Bumper Perfect Hole Punch.

Since introducing the Bumper Perfect punch kit in 2013, new sizes have been added to the fleet of vehicles on the road today, thus the need for four new-size punching dies.

John Bean Tru-Point Now Offers 360-View Camera Calibrations

John Bean customers can use the TGT-05 kit to easily calibrate the 360 cameras for a variety of manufacturers including Audi, Bentley, Ford, Lamborghini and Volkswagen.

Ultimate Frame Coater Kit for Inside-Out Rust Protection

KBS Coatings’ Ultimate Frame Coater Kit provides everything needed for ultimate inside-out rust protection for auto frames, auto bodies and more.

Milwaukee Introduces New M12 FUEL Bandfile

Milwaukee Tool has introduced the new M12 FUEL Bandfile, which delivers fast spot removal, unmatched control and greater mobility and access in application.

SATA Introduces Green SATAjet X 5500 FUTURE Spray Gun

The green SATAjet X 5500 FUTURE spray gun is not only a reference to nature, but also a symbol for harmony and hope — especially for the future.

Other Posts

Automotive Painting: It’s Still a Good Trade

I can think of no other industry where a young man or woman can start in an entry-level position and excel to an extremely comfortable living — without ever going to formal schooling or training.

AkzoNobel Podcast Reveals Need to Rethink Vehicle Refinishing

The podcast featured Michael Giarrizzo and Graham Threlfall discussing how body shops will need to operate in the future to survive.

SCRS Study Concludes Blend Time is Greater than Full Refinish

The SCRS has published the results of their blend study research project, concluding that blending, on average, took 31.59% more time than a full refinish.

Bosch Releases Updates for ADS and ADS X Series Scan Tools

These updates have introduced a “manage photo” feature, allowing techs to launch the camera or upload existing photos to scan reports, special test and calibration reports.