3M Unveils Impact Resistant Structural Adhesive

Meet Bonding Requirements with 3M’s Impact Resistant Structural Adhesive

3M Impact Resistant Structural Adhesive has adhesion to a wide variety of properly prepared automotive substrates including steel and aluminum.

3M-adhesive

3M has unveiled a solution for when true structural bonding requirements are specified by the automotive OEMs for collision repair – the 3M Impact Resistant Structural Adhesive 07333/57333.

3M Impact Resistant Structural Adhesive is a two-part epoxy adhesive that provides an extended work time, but can be rapidly cured with heat. 3M Impact Resistant Structural Adhesive has adhesion to a wide variety of properly prepared automotive substrates including steel and aluminum.

This adhesive is intended for true structural bonding applications when specified by automotive OEMs, and is recommended for all weld-bonded and rivet-bonded joints.

By applying its advanced science to the challenge and through close working relationships with several OEMs, 3M was able to develop the 3M Impact Resistant Structural Adhesive which can address several of the issues vehicles encounter today during collision repairs.

You May Also Like

Vessel Tool Introduces 36-Piece Screwdriver Bit Set

The 9836U replaceable 36-piece screwdriver bit set’s high-precision hardening and machining ensure sufficient hardness, toughness and accuracy in fitting various screw recesses.

Vessel Tool has introduced the 9836U replaceable 36-piece screwdriver bit set made of special alloy steel for industrial use. High-precision hardening and machining ensure sufficient hardness, toughness and accuracy in fitting various screw recesses.

Grip surfaces are made of hard anodized aluminum. The end cap rotates smoothly for excellent operation. Bits can be easily replaced thanks to the magnet built into the end of the grip. The strong magnet force can attract small screws.

Honda Starts Production on 2025 Honda CR-V Fuel Cell EV

The all-new CR-V e:FCEV is the first production hydrogen FCEV in the U.S. to combine an all-new U.S.-made fuel cell system with plug-in EV charging capability.

GM to Invest $23M in Charlotte Parts Distribution Center

The investment will be used to continue increasing workplace safety and modernizing operations to prepare for industry growth.

Honda Announces America’s First Production Plug-in Hydrogen Fuel Cell EV

Honda has unveiled America’s first production plug-in hydrogen fuel cell electric vehicle, the 2025 Honda CR-V e:FCEV.

GM Launches EV First Responder Training

New online content will help prepare first and second responders for emergency situations pertaining to electric vehicles.

Other Posts
Evergrade Introduces Two New Cordless Sanders

The RGX Pro 332 has a 2.5mm offset for finish sanding, and the RGX Pro 316 has a 5.0mm offset for aggressive sanding. 

Walmec AMD-035 Membrane Dryer for Ultra Clean and Dry Air

The AMD-035 Membrane Dryer is the best choice for waterborne paint applications or other sensitive tasks that require the highest standard of clean and dry compressed air.

Snap-on Introduces New 1,000 Lumen Rechargeable Battery Bar Light

The ECFDG108 has a runtime of 3-1/4 hours on high and 24 hours on low, ensuring constant illumination for maximizing productivity.

Eurovac Introduces Eurovac II Dust Extraction System

The Eurovac II features a 2.5-hp motor capable of handling two technicians sanding at the same time.