Complete Compressed Air System
Cleaning, drying and heating the atomizing from your existing compressed air source can be accomplished with The Solution by Martech Services Company. The Solution is a complete compressed air system designed to clean, dry and heat the atomizing air for spray paint requirements. It has four-stage filtration and an automatic moisture discharger. Clean air is
Redesigned 15- and 20-hp Air Compressors
Kaeser’s redesigned SK rotary screw compressors are reliable, efficient 15- and 20-hp industrial air compressors that are easier to maintain and offer a smaller footprint than older models. The units provide greater flow at 46-89 cfm with pressures from 80-217 psig. The SK series still features the Sigma Profile airend, as well as automatic belt
Single Line Hose Breathable Air System
Compliance with the OSHA requirement for Grade “D” Breathable Air can be accomplished with the use of a Quality Air Breathing System Model 50 Sl. When used properly, the system will work with the existing compressed air supply to provide breathable air for a NIOSH-approved respirator, and with the provided 54-in. tool air hose, it
High-Performance Filtration
The Tsunami Water Separator and Oil Coalescing Filtration System is a high-performance filtration package that provides flawless finishes for all spray applications. The Tsunami Water Separator is a high quality filtration product that removes liquids and dirt particulates from compressed air systems with a capacity of up to 240 standard cubic feet per minute. The
Versatile Compressed Air System
The modular, aluminum compressed air distribution system SmartPipe is a versatile piping system featuring lightweight materials and push-to-fit connectors that can be installed without threading, welding or sweating. SmartPipe can be easily integrated into existing steel or copper systems and modified to accommodate changing needs. Available in multiple sizes from ½ to 4 inches, it’s ideal
Single-Line Hose Breathable Air System
Comply with OSHA air requirements with a Quality Air Breathing System Model 50 SL from Martech. The system works with an existing compressed air supply to provide Grade “D” Breathable Air for a NIOSH-approved respirator. With a 54-inch tool air hose, it supplies spray gun air via its single-line hose assembly. The system has four-stage
High Quality Air Filter
LA-MAN Corporation’s SuperStar .01 Micron Filters efficiently remove moisture and contaminants from air lines to improve and extend the life cycle of tools and equipment. The four-stage filter is designed to operate most effectively within 25 feet of the point of use. The SuperStar .01 Micron Filter is an ideal solution for an array of
Breathe Easy
Comply with the OSHA requirement for grade “D” breathable air by using a Quality Air Breathing System – Model P-20, Personal Air Breathing Unit. When used properly, it will work with the existing filtered compressed air supply. A 20 scfm system, it can be used with full hoods and equipped with vortex cooling tubes. It
Single-Line Hose Air
The Quality Air Breathing System Model 50 SL ensures compliance with the OSHA requirement for Grade “D” Breathable Air. When used properly, it will work with the existing compressed air supply. It provides breathable air for a NIOSH-approved respirator, and with the provided 54" tool air hose, it will supply air for a spray gun,
Clean, Dry and Heat Air
Clean, dry and heat the atomizing air from your existing air compressor with The Solution. Its fourstage filtration is outfitted with an automatic moisture discharger. A controller, with digital outputs, allows users to set the temperature of the atomizing air up to 165 degrees F. It comes with a 3/8” ID x 35’ spray air
Superheating Technology
The DFM800R air make-up unit provides the airflow and temperature rise recommended by paint manufacturers for the curing of waterborne and solvent-based coatings. “Superheating” cure technology recirculates air within the unit, allowing air to pass by the burner numerous times before it enters the booth for faster dry times, lower operating costs and a better
No-Noise Compressors
The QT-Xtreme and PLT-Xtreme are the industry’s only continuous-duty reciprocating compressors with a canopy for delivering reliable shop air without all the noise. They allow for normal conversation while running and boast sound levels as low as 64 db(A) on a 5-hp model and 65 db(A) on a 7.5-hp unit..
