A Breath of Fresh Air
Protect yourself and your workers from inhaling hazardous fumes, gases, emissions and vapors with the redesigned Kaeser Breathing Air System (KBS). It removes excess moisture, solid particles, oil and oil vapor, and carbon monoxide that may be present in ordinary compressed air. The system meets health and safety requirements, and can feed face masks, hoods
Quiet and Powerful
Packaged for quiet operation, easy maintenance and powerful performance, the QT-Xtreme and PLT-Xtreme continuous-duty reciprocating compressors feature a canopy for delivering reliable shop air without all the noise. Extremely quiet, they allow for normal conversation while running and boast sound levels as low as 64 db(A) on a 5hp model and 65 db(A) on a
Super-Quiet Operation
The new SK AirCenter series from Kaeser Compressors features energy-saving rotary screw compressors and reliable refrigerated dryers. It’s available in 15-20 hp models producing 40-78 scfm at pressures to 217 psig. All AirCenter models are tank-mounted and have a space-saving design. It also features split cooling air flow design and insulated enclosure for quiet operation.
Clean, Dry and Heat Air
Clean, dry and heat the atomizing air from your existing air compressor with The Solution. Its fourstage filtration is outfitted with an automatic moisture discharger. A controller, with digital outputs, allows users to set the temperature of the atomizing air up to 165 degrees F. It comes with a 3/8” ID x 35’ spray air
Energy-Saving Air Compressors
Atlas Copco has re-engineered its range of small GA compressors – 15-40 hp GA+/GA VSD – to provide greater energy savings through a combination of free air delivery (FAD), increased efficiency, a smaller compressor footprint and lower noise levels. All of the Atlas Copco 15-40 hp GA+/GA VSD models are among the most energy efficient
Improve Drying Time and Spray Quality
The WALCOM TD3 allows painters to use filtered, dry, heated and thermo-regulated compressed air, and improves spraying quality, drying time and paint lay-out. The TD3 also lowers the dew point and eliminates the need for buffing or polishing. Works with waterborne and solventborne paints.
Reduce Energy Costs
FSCURTIS Masterline Duplex Reciprocating ULTRA PACK Compressor reduces energy costs with alternating compressor technology. It has all the options you need: air-cooled aftercooler, magnetic motor starter, dual control, low oil level shutdown, automatic tank drain, tank isolator pads. Horsepower ranges from 15 to 30, and it comes factory oil filled with a five-year limited warranty.
Complete Compressed Air System
“The Solution” is a complete compressed air system designed to clean, dry and heat the atomizing air for today’s spray paint requirements. It works well with both waterborne and solvent- based paint systems. It’s easy to use, simple to install and affordable to maintain. Call (800) 831-1525 or visit www.breathingsystems.com.
Remove Contaminants, Save Energy
Kaeser Automatic Magnetic Drains (AMDs) remove condensate and other contaminants from your air system, protecting your valuable equipment. The AMD 1550 has working pressures to 230 psig and a discharge capacity of 53 gal/hr. Designed for use with coolers, refrigerated dryers, separators, filters and liquid separators, it maintains a “liquid seal” which prevents the loss
Convenient Air Compressor Package
The Ultra Pack ML Series 15- to 30-hp air compressors reduce up to 70 percent of moisture in the air stream. They also feature: magnetic motor starter; low oil level switch; dual control; vibration pads; automatic tank drain; five-year limited warranty; factory oil filled. They’re also simplex and duplex tank mounted to meet any application.
Efficient Air Compressor
The Ultra Pack Compressor is made of cast iron and is conveniently packaged with the following optional equipment: air-cooled after cooler – reduces up to 70% of moisture in the air stream; magnetic motor starter – factory installa tion; designated voltage; low oil level switch – automatically shuts the compressor unit down; dual control –
Complete Compressed Air System
The Solution is a complete compressed air system designed to clean, dry and heat the atomizing air for today’s spray paint requirements. It’s easy to use, simple to install and affordable to maintain. When placed near the point of use, The Solution will work with the existing compressed air source. The four-stage filtration is outfitted
