Speed Dry Waterborne
The Speed Dry is designed as an ultra-efficient electric alternative to the air-consuming venturi systems currently being sold for accelerating waterborne primers and basecoats. The Speed Dry with Heater (part no. 15-1015) is also available and provides the ultimate combination for fastest dry times available. Visit www.infratech-usa.com.
Magnetic Blower Hanger
Maximize space in the booth with the new magnetic blower hanger. Move it anywhere on the booth wall and easily aim your blowers at the targets. Its wide reach and pivoting movement make it easy to use. There is no air piping, drilling or retrofitting necessary. Just attach it to the wall using its powerful
Dry Waterborne Fast
The AdvanceCure Accelerated Airflow System is ultimate solution for body shops looking to retrofit their paint booths for enhanced waterborne drying performance. It yields the fastest drying times with waterborne paints and provides complete vehicle airflow coverage for consistent drying over the entire vehicle. It’s also fast and easy to install into virtually any model
Reduce Dry Times
Accele-Cure reduces dry times with both waterborne and solvent-based products as uniform metal temperatures are achieved faster. Installation is fast for minimal downtime. Also, it’s competitively priced and energy efficient, costing less than $1 per hour on average to operate. It’s also maintenance-friendly with no additional ducts and filters to be cleaned or replace. No
Double-Insulated Paint Mixing Rooms
Col-Met Spray Booths’ AR Evolution Series Double-Wall Insulated Paint Mixing Rooms provide a contaminant-free environment for paint preparation and mixing. Delivering optimal air circulation and filtration, these UL/ETL Listed mixing rooms remove air particulates that can negatively permeate paints while being processed. Visit www.colmetsb.com or www.evolutionbooths.com.
Upgrade Spraybooths to Waterborne
Accudraft’s new AccuQUAD System spraybooth upgrade supplies additional air flow from the corners of the spraybooth cabin. The clean, filtered and heated air provided by the AccuQUAD towers allow for fast, controlled flash-off of waterborne basecoats and rapid curing for low-VOC topcoats, regardless of the spraybooth’s normal airflow rate. Call (800) 524-0340.
Superheating Technology
The DFM800R air make-up unit provides the airflow and temperature rise recommended by paint manufacturers for the curing of waterborne and solvent-based coatings. “Superheating” cure technology recirculates air within the unit, allowing air to pass by the burner numerous times before it enters the booth for faster dry times, lower operating costs and a better
Versatile Booth Filter
GFS Wave is a versatile single-stage filtration media made for spraybooths. The high-performance filter media has a 99.67% particulate removal efficiency and a holding capacity of 7 lbs. It also provides full depth loading with minimal face loading.
Affordable Spraybooths
A-Frame’s bolt-together, 18-gauge steel spraybooths are made in the USA, come in many sizes and feature many extras. Auto booths include lights, fan and motor, single- or three-phase power, motor control panel and more – all for $4,995. Call (877) 338-3006.
Block Out Bugs
Goff’s bug blocking doors keep the pests out while allowing the fresh air in. The doors are available with the following options: three different motor speeds up to 36” per second; manual chain hoist or spring assist; wind load rated doors; 7 different colors; solid vinyl doors available. Call (800) 234-0337.
Booth, Floor Wrap Films
Self-adhesive Booth Wrap Film is simple to install. One kit lines the walls of booths 14 feet by 27 feet to 10 feet high. Offering a reflective surface, Bright White Floor Wrap Film is prepared to handle high-turbulence booths. It’s also useful on mixing room floors and other areas. Call (888) 264-3770. .
Faster Dry Times
A strategically placed accelerator system in-creases airflow, which reduces flash times and bake cycle times. This results in reduced dry times with waterborne and solvent-based products; uniform metal temperatures are achieved faster; minimal downtime during the installation of Accele-cure; quietness and ease of operation; competitive cost as compared with other retrofit systems; and energy efficiency
