Reducing Cycle Time: How to Maximize Your Shop’s Potential

Original Air Date: July 14, 2022

On-Demand Webinar

Sponsored By U-POL

Cycle time is just one component in the measurement of key-to-key time, which most collision repair shops monitor to maintain a healthy business. Even though the measurement of cycle time does not officially begin until the necessary parts and repair materials are in technicians’ hands, this critical distinction in your process is irrelevant to the consumer. Whatever can be done to shorten the time it takes to repair and return a vehicle is critical to achieving high customer satisfaction rates and maximizing throughput, so your business operates as smoothly as possible.

In this 60-minute session, we will explore:

Potential bottlenecks that can slow down the repair process
Ways to increase throughput and reduce cycle time
Time and energy savings advantages of combining key U-POL products in the filling and priming stages of repair

Speakers

Dan Reutter, Technical Specialist, U-POL
Mark Thomas, National Training Manager, U-POL
Jason Stahl, Editor, BodyShop Business

Connect with us

AirPro Diagnostics

Close Sidebar Panel Open Sidebar Panel

AirPro Diagnostics

Troubleshooting Vehicle Calibration Failures, Part 2

BodyShop Business Staff Writers

July 25, 2022

Pre-checks you should be performing prior to a calibration.

BodyShop Business Editor Jason Stahl discusses pre-checks you should be conducting before starting a calibration from the BodyShop Business AirPro Diagnostics Collision Garage at Babcox Media. For more information, visit airprodiagnostics.com.

Click Here to Read More

To watch part 1, click here.

In this article:airpro diagnostics