What Is the Process for Buffing the Clearcoat Using RM Onyx HD Waterborne Paint? - BodyShop Business

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
BodyShop Business
The information source for the collision repair industry.
Refinish

What Is the Process for Buffing the Clearcoat Using RM Onyx HD Waterborne Paint?

What is the process for buffing the clearcoat using RM Onyx HD waterborne paint? Are there differences between buffing that and buffing the solvent-based clearcoats?

BodyShop Business Staff Writers
By BodyShop Business Staff Writers

What is the process for buffing the clearcoat using RM Onyx HD waterborne paint? Are there differences between buffing that and buffing the solvent-based clearcoats? 

Related Articles

Asked by Larry Farley, Larry Farley Paint & Body, Bessemer, Ala.

Question answered by the BASF technical staff.

All of BASF’s clearcoats are solvent-based, so there is no difference when buffing them. If you need more specific information about a particular clear, visit www.basfrefinish.com and click on "Find a TDS" in the middle of the page. From there, you can select the exact product you’re using to get all the technical information needed.

You May Also Like

Refinish

Auto Refinish: Accepting the Challenge

In order to overcome refinishing challenges, one must first understand the issues encountered.

Avatar
By Bud Center

In the collision repair industry, it is not uncommon to run into challenges. Whether it’s in the damage analysis process, straightening of a vehicle or proper fitting of a panel, there will come a time when things just do not go as planned. Many of these challenges are easy to overcome due to the limited number of reasons they occur. However, the same cannot necessarily be said for challenges that arise in refinishing.

Read Full Article

More Refinish Posts
P&M Profitability: Examining the Metrics

If we are not profitable with paint and materials, then the stark reality is that we are paying to fix the car.

By Carl Wilson
Paint Problem Troubleshooting

Collision repair facilities today face many challenges with paint. Here are some common problems and how to overcome them.

By BodyShop Business Staff Writers
PPE and COVID-19

With COVID-19 bringing a heightened sense of self-protection to the forefront, now is the time to reinforce the importance of PPE in the body shop.

By Carl Wilson
The Reality of PBE Value-Added Services

Both PBE distributors and manufacturers offer beneficial value-added services – but there is a catch.

By John Halstead

Other Posts

Doctor Gun, I Presume?

One man who is still around who taught me about both spray guns and selling PBE products with enthusiasm was Doctor Gun.

By Mark Clark
Refinish: Separating Your Body Shop from the Competition

How can we showcase our refinishing skills in a manner that separates us from other shops and drives business to our door?

By Carl Wilson
The Evolution of Spray Guns

Both spray gun technology and the cost of spray guns have increased dramatically since I first wrote about them in the September 1991 issue of BodyShop Business.

By Mark Clark
BASF Opens Modular OEM Coatings Lab in Germany

BASF’s Coatings division has opened a new laboratory for automotive OEM coatings at its site in Münster, Germany, aimed to ensure optimized, digitalized and transparent processes, and efficient use of resources in the laboratory area throughout Europe.

By BodyShop Business Staff Writers