Safely Load Disabled Vehicles
The I-Bolt allows body shop technicians to safely load disabled foreign and some domestic vehicles on rollback wreckers and frame racks without causing damage.
Eight Working Heights
The American Freedom is a versatile collision repair frame machine that gives you eight working heights from 12 to 42 feet, a 9,900 pound lift capacity and 10 tons of pulling.
No Towers in the Way
The Multiple Vector Pull gives you total access to the bottom of a car without having to push big, bulky pull towers out of the way.
Aggressive Sanding Tool
sia Abrasives’ siabite 2511 File Belts contain self-sharpening ceramic grits and are designed for heavy-duty metal work.
Aligning Car Panels: Closing the Gap
There are many reasons for poor bolt-on panel misalignment, some structural, some human error. But there are certain steps you can take to eliminate this problem and keep customers happy.
Instant and Secure Anchoring
DROP-N-LOC Anchors are milled from the highest quality steel, heat treated for strength, carburized for an extra-hard surface and zinc-plated for long-term rust prevention. They’re not a cast! They provide instant and secure 360º anchoring. Changing anchoring points is fast and easy – no more fastener plates, no bolts, just “DROP-N-LOC.” Your tech’s knees and
Drive-On Ramp Kit for Quick42 Frame Bench
Car-O-Liner’s Q400 drive-on ramp kit, a component of the Quick42 adjustable frame bench, offers wider ramp sections and approach ramps than the standard Q300 kit. The Quick42 frame bench provides easy access for cosmetic repairs and offers the ability for anchoring on the same platform if structural repairs are needed. Compatible with the Car-O-Tronic Vision
Instant and Secure Anchoring
DROP-N-LOC zinc-plated anchors provide instant and secure 360° anchoring. These anchors install all the way through the deck, reduce cycle time and protect the deck from misuse, pull-ups and tears. Changing anchoring points is fast and easy. No more fastener plates and no bolts – just “DROP-N-LOC.” Your techs’ knees and back will thank you
Pulling System for Advanced Steel
The use of high-strength steel (HSS) makes modern vehicles lighter and stronger, and it also makes repairing them more complex. Chief offers a range of pulling systems ideal for repairing this advanced metal. The Impulse-E/VHT, Goliath and Titan-360 feature an electric-over-hydraulic system to equalize pressure to all towers in use. These Chief pulling systems also
Hunter WinAlign Specs Now Available
Hunter’s 2011 spec release for WinAlign alignment systems is now available. The release includes 465 new light-vehicle specs, updated specs for 400 older vehicles and updates for Hunter’s CodeLink reset device. Code-Link is now able to reset steering system sensors on over 60 additional models. The release also updates Hunter’s integrated TPMSpecs database and Tools
Big Pulling Power in a Small Package
The EZ Liner Express collision repair system is a compact, in-bay solution priced at less than $10,000. With a constant 5 tons of power at the hook and lifting capacity up to 5,500 lbs., it can reverse light hits as well as serve as an all-purpose service lift/workstation for improving bay ergonomics and productivity on
Wider, Stronger Frame Machine
The American Freedom GT collision repair frame machine is a wide and strong piece of equipment. At 92 inches wide, it allows body shops to increase productivity by accepting heavier and wider vehicles. It has working heights as low as 12 inches and as high as 42 inches in addition to a 12,000-lb. lift capacity.
