High Quality Air Filter
LA-MAN Corporation’s SuperStar .01 Micron Filters efficiently remove moisture and contaminants from air lines to improve and extend the life cycle of tools and equipment. The four-stage filter is designed to operate most effectively within 25 feet of the point of use. The SuperStar .01 Micron Filter is an ideal solution for an array of
Clean, Dry Air from Existing Compressor
The Solution by Martech Services Company can clean, dry and heat the atomizing from your existing compressed air source. The four-stage filtration uses an automatic moisture discharger, then the clean air is filtered again to remove moisture. A controller with digital outputs can set the atomizing temperature up to 165º F. Also includes a 3/8-inch-diameter
TECH FEATURE: Nuts and Bolts of Suspension Repair
Repairing vehicle suspensions may seem daunting, but if you stray out of your comfort zone and give it a shot, you may just be able to add more dollars to your bottom line.
A Breath of Fresh Air
Protect yourself and your workers from inhaling hazardous fumes, gases, emissions and vapors with the redesigned Kaeser Breathing Air System (KBS). It removes excess moisture, solid particles, oil and oil vapor, and carbon monoxide that may be present in ordinary compressed air. The system meets health and safety requirements, and can feed face masks, hoods
Compressed Air Solutions
Tsunami carries compressors, dryer systems, SFD Ultra Drying Systems, filtration packages and spray hoses. The company takes care of everything from the compressor to the booth! Visit www.tsunami.us.com.
President of Kaeser Compressors to Serve as Compressed Air and Gas Institute President
Frank Mueller, president of Kaeser Compressors, Inc., was recently named president of the Compressed Air and Gas Institute (CAGI). Mueller will serve in the post for two years. “CAGI has done an excellent job of raising awareness on the importance of compressed air,” said Mueller. “During my term, we will continue to make CAGI the
Single-Line Hose Air
The Quality Air Breathing System Model 50 SL ensures compliance with the OSHA requirement for Grade “D” Breathable Air. When used properly, it will work with the existing compressed air supply. It provides breathable air for a NIOSH-approved respirator, and with the provided 54" tool air hose, it will supply air for a spray gun,
Clean, Dry and Heat Air
Clean, dry and heat the atomizing air from your existing air compressor with The Solution. Its fourstage filtration is outfitted with an automatic moisture discharger. A controller, with digital outputs, allows users to set the temperature of the atomizing air up to 165 degrees F. It comes with a 3/8” ID x 35’ spray air
Energy-Saving Air Compressors
Atlas Copco has re-engineered its range of small GA compressors – 15-40 hp GA+/GA VSD – to provide greater energy savings through a combination of free air delivery (FAD), increased efficiency, a smaller compressor footprint and lower noise levels. All of the Atlas Copco 15-40 hp GA+/GA VSD models are among the most energy efficient
Get Good Air
Your compressed air system is vital to most of the functions in your shop. That’s why ongoing, preventive maintenance is crucial to maintaining
performance and efficiency.
