BodyShop Business Staff Writers, Author at BodyShop Business - Page 1610 of 1630
Long, Strong Pulling System

At 22’ long and 92” wide, Goliath is the longest, strongest passenger car and truck pulling system Chief has ever produced. It features Sure-Lock towers with 10 tons of power at the hook, a 12,000-lb. lift capacity, up to 280 available tie-down locations and variable height options from 19” to 40”. Call (800) 445-9262.

Get Total Access Easily

This center scissors lift can easily be positioned anywhere along the center alley of the machine with the pull handle. Lift one end at a time. Sill clamp heads pivot to accommodate angle. Slide it out of the way after mounting for total access to the bottom of the car. Also great for wheel alignment

Cure Hard to Reach Areas

The Speed Ray 2 is a high-intensity, portable shortwave lamp capable of both vertical and horizontal flexibility for curing hard to reach areas. It features 1,650 watts of curing power over a 3’ x 4’ coverage area. A 60-minute timer and auto shutdown feature save energy. An iridium-filtered halogen bulb reduces glare for operator safety.

Dry Waterbornes Fast

The SpectraJet air mover is designed to dry waterborne basecoats. It outperformed its nearest competitor by 22 percent and reduced dry times to as little as just four minutes. Only $399, it’s for body shops looking for a cheaper alternative to using heated air in the spraybooth to dry waterbornes. E-mail [email protected].

More Accurate Measuring

Something new could be rolling into your shop soon: a more affordable, more accurate and scalable measuring system that lets even the smallest shop measure and report vehicle damage, even better than the big shops. Call (866) 622-0303, e-mail [email protected].

All-In-One Detailer

MYTEE’s Deluxe Prep Center is a wet-dry vac, hot water extractor, chemical dispenser, dryer and organizer in one unit. Save space and money, and make auto detailing effective and trouble-free.

No Lint and No Tears

These super-absorbent cloths, made of low-linting fabric, outperform paper and are so long- lasting they can be used again and again, even with solvents. Whether used wet or dry, their extreme durability translates to the best value for money. E-mail [email protected].

Joint-Venture Motorcycle Project

WIZARDS Products/RJ Star Inc. and ChromeFusion LLC/Sanjoy Engraving are creating a one-of-a-kind Joint-Venture Motorcycle Project. Work has begun on a Harley Davidson Road King that’s a platform for the artful creations of ChromeFusion, which involves engraving into metal, “show chroming” and custom paint together on the same surface. The project will be on display in

Quiet Air Compressors

Kaeser’s 3-, 5- and 7-hp SX rotary screw compressors are available with pressures from 80 to 190 psig. They provide improved performance, continuous dutycycle and the lowest noise levels in the industry at 62 dB(A).

Portable Nitrogen Generator

This portable nitrogen unit comes complete with four 25’ inflation hoses, six auxiliary ports, a hand-held nitrogen analyzer, pre- filters, a 30-gal. vertical air receiver and industrial-type casters. The controller is located on the top of the unit for easy readability and includes an automatic purge system that allows you to purge and inflate four

Non-Hazardous Paint Gun Cleaner

The Bonny Marlin is a zero-hazardous waste, non-hazardous paint gun cleaning and recycling system that uses an EPA-recognized non-hazardous solution to clean waterborne and solventborne paints. The cleaning solution is used over and over. Lacquer thinner and electric recyclers are no longer needed.

Detect Harmful Gasses

GfG’s new intrinsically safe G460 is a rugged, compact instrument for simultaneous detection of up to six gasses. Installed sensor options include infrared (NDIR) for CO2 and PID for VOC measurements. The G460 offers automatic calibration, one-button operation, top-mounted display and interchangeable battery packs. GfG’s concussion-proof boot, along with the highly dust- and water-resistant housing,