VIDEO: Providing a Safe Workplace, Part 2

VIDEO: Providing a Safe Workplace, Part 2

The duties of a collision repair facility owner when it comes to providing a safe workplace.

BodyShop Business Editor Jason Stahl explains the duties of a collision repair facility owner when it comes to providing a safe workplace from the BodyShop Business Launch Tech USA Collision Studio at Babcox Media.

This content was based on an article that S/P2 wrote for BodyShop Business. For more training guidance from S/P2, visit sp2.org.

To watch part 1, click here.

You May Also Like

EV Safety Basics on the Shop Floor – Part II

As long as you follow the EV guidelines, you’re going to have to use the proper PPE and insulated tools.

Staying safe while working on an electric vehicle (EV) requires the correct shop equipment as well as the correct personal protective equipment (PPE), and shortcuts are simply not an option. Let’s take a look at everything you're going to need.

We’ll start with PPE and electrical safety gloves. Class zero electrical insulating gloves rated for 1000 volts are required for EV service. Simply put, these gloves prevent high voltage (HV) from traveling through your hands, and they must be tested every time you use them by checking for a pinhole or any damage that could allow voltage to pass through a glove. An insulator is the most efficient way to do this. Insulating gloves must also be clean and dry so there are no conductive substances that can allow HV to travel outside the glove to your arm. Treat these safety gloves with extreme care. They can be damaged easily and they’re sensitive to UV rays, so they should be stored in a dark, dry environment. A ventilated UV-resistant bag is the best option. Safety gloves must also be re-certified every six months. You’ll also wear them with a leather outer glove to protect them; most prefer to wear an inner cotton glove as a liner to allow your hands to breathe.

EV Safety Basics on the Shop Floor – Part I

It’s critical to utilize OE service information and procedures for each and every hybrid or EV.

Tips for Lifting HEVs and BEVs

If you can’t lift a vehicle without damage, you will not be able to unlock this service opportunity in this growing segment.

Randy Breaux, Group President, GPC North America, Talks to AMN Drivetime

At NAPA, “Breaux Knows” business relationships, ABCs to avoid, and serving the automotive professional.

Mike Mohler: Being an Aftermarket Catalyst

For Mohler, it all began in Monroe, Louisiana, where he worked for his father, Ray.

Other Posts
New BendPak Lift Comes with Eight Expandable Arms

Take a walk with Sean Price, director of sales operations at Bendpak, to see the demonstration of Bendpak’s Octoflex Series concept lift.

WATCH: Advancements in Lift Technology

The new BendPak Octoflex Series concept lift is a two-post lift with eight arms, making it easier to lift vehicles on a traditional two-post lift.

BendPak Introduces New Octa-Flex Lift: Inside Look

Susan Givens of AutoSuccess magazine speaks with BendPak’s Sean Price about the groundbreaking Octa-Flex Series concept two-post lift.

U-POL Raptor Product System, Pt. 3: Texture Replacement

You need to have a wide range of atomization when looking to produce very fine textures required for two-coat texture replacement.