The Road to AAPEX, Episode 6: The End of the Road

The Road to AAPEX, Episode 6: The End of the Road

Now there’s just one question left to answer: Did Joe and the Caddy make it to Las Vegas for AAPEX?

It all comes down to this. 

“I didn’t want something easy. I wanted something that was going to be an ‘Are you going to make it?’ moment every time I get in the car.”

That’s how Babcox Media’s Joe Keene set the stage in the first episode of Road to AAPEX, well before he knew what was ahead of him. And oh boy did he deliver on those “Will he make it?” moments. 

The road to fixing up a 33-year-old Cadillac Brougham with more than 180,000 miles on the odometer to make the 2,500-mile drive from Akron, Ohio, to Las Vegas for AAPEX was long and unpredictable. It was also fun and exciting as Keene, an ASE-certified technician, was able to take in the sights of America’s automotive past on Route 66. 

As the journey rolled on, one thing became clear: If the Caddy was going to make it, if it was even possible, the automotive aftermarket would make it happen. The automotive supplier partnerships, the independent shops — the people that are the heartbeat of the aftermarket industry — were behind him every step of the way.

Now there’s just one question left to answer: Did Joe and the Caddy make it to Las Vegas for AAPEX? 

For the answer, watch the episode above.

Need to Catch Up?

Watch episode 1 of The Road to AAPEX here.

Watch episode 2 of The Road to AAPEX here.

Watch episode 3 of The Road to AAPEX here.

Watch episode 4 of The Road to AAPEX here.

Watch episode 5 of The Road to AAPEX here.

You May Also Like

Introduction to the Maverick Tire Changer

Joe Keene of Babcox Media speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Joe Keene, automotive content video producer at Babcox Media, speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer and runs thorough a demonstration of a typical low-profile sidewall procedure. This video is sponsored by Hunter Engineering Co.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene, automotive content video producer at Babcox Media, discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Jumpstarting an EV

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

At the Intersection of Tradition and Innovation with Grace Hovis

Grace Hovis’s journey in Hovis Auto & Truck Supply blends tradition with digital innovation in the automotive aftermarket industry.

Other Posts

Autel’s ADAS Bay Max Vehicle Lift

Discover the revolutionary Autel ADAS Bay Max vehicle lift at the Autel Research and Testing facility in New York.

BEV Brake Service Tips

Andrew Markel shares his latest service tips in the all new BendPak EV Garage video series.

The Importance of Volunteering and Giving Back to the Aftermarket with Jon Owens

Owens describes what he’s learned from volunteering in the industry and his vision for AACF as current its president.

Limited Space Calibrations

Joe Keene, automotive content video producer at Babcox Media, discusses the popular misconception that shops need a large amount of space to do ADAS work.