BendPak Announces New Longer-Lasting LITESTIX

BendPak Announces New Longer-Lasting LITESTIX

The LITESTIX portable LED work light now provides up to seven hours of continuous use on one charge.

BendPak has introduced the new LITESTIX LS36SMDX portable LED work light, now powered by a higher-capacity rechargeable battery that provides up to seven hours of continuous use on one charge. It is designed to train task lighting wherever it’s needed without cords getting in the way. The light boosts visibility where general lighting isn’t strong enough, such as inside engine compartments, vehicle interiors and underneath lifts, as well as when work is underway at night.

Upgrading the rechargeable lithium battery from 1800 mAH (milliampere-hour) to 2600 mAh means the latest LITESTIX model can deliver another full hour of performance. The work light boasts 36 LED bulbs that together generate 1,200 lumens of bright white light. Each lamp also features high and low brightness settings.

Thanks to its high-efficiency LEDs, LITESTIX uses less energy and stays cool, making it easy to move around a vehicle without worrying about getting burnt. Designed for a long life of heavy-duty use, each LITESTIX is encased in an impact-resistant polycarbonate housing. Other key features are an innovative telescoping holder and magnetic swivel mounts that let you put it where you need it.

LITESTIX also solves the century-old problem of how to sit a shop light snugly on a vehicle’s hood, roof or other points on the body. Placement on the vehicle is often necessary to get the best visibility, but traditional lamps roll off. To accomplish this feat, LITESTIX has dual 90-degree swiveling handles equipped with magnetic ends that enable mounting the light tube on any flat or off-angle metallic surface.

The lamp’s all-steel telescoping cradle frame can extend from 49.5” to 79.75” in length and can secure to the underside of a vehicle hood, for example, with the help of grabbing hooks attached at both ends of the frame. When used without the cradle frame, LITESTIX can be hung using recessed hooks inside the handles that twist out as needed.

To order or learn more about the next generation of LITESTIX, click here or call (800) 253-2363.

You May Also Like

Dent Fix Introduces Cold Adhesive Glue Pad Set

The kit is a great way for collision repairers to quickly and safely move large areas of metal efficiently when paired with a separately sourced slide hammer.

Dent Fix Equipment's Cold Adhesive Glue Pad Set with Mammoth Tar DF-CGS72 is a lightweight kit that is a great way for auto body professionals to quickly and safely move large areas of metal efficiently when paired with a separately sourced slide hammer.

The kit includes:

Snap-on Takes the Heat Off Upgrading A/C Service Lines

Snap-on helps shops take the heat off upgrading and adding A/C service with products ranging from recyclers to leak detectors and enhanced protective equipment.

Florida Pneumatic Introduces New AIRCAT 6410 3/16″ Air Hydraulic Riveter

The new AIRCAT 6410 3/16” Air Hydraulic Riveter features 2,000 lbs. of pull force and is designed to handle both 5/32” and 3/16” steel and aluminum structural rivets.

Polyvance Extends Promotional Pricing on 6180 MiniFuzer

The recent promotional user pricing of $499.95 on the 6180 MiniFuzer Hot Air Plastic Welding Station will continue indefinitely.

Auto Magic Launches Liquid Clay Decon

Liquid Clay Decon is a spray-on and rinse-away, color-changing and pH-neutral exterior decontaminant that is safe on all exterior substrates.

Other Posts

New BendPak Lift Comes with Eight Expandable Arms

Take a walk with Sean Price, director of sales operations at Bendpak, to see the demonstration of Bendpak’s Octoflex Series concept lift.

BendPak Introduces New Octa-Flex Lift: Inside Look

Susan Givens of AutoSuccess magazine speaks with BendPak’s Sean Price about the groundbreaking Octa-Flex Series concept two-post lift.

Florida Pneumatic Introduces New AIRCAT 6420 1/4″ Air Hydraulic Riveter

The new AIRCAT 6420 1/4” Air Hydraulic Riveter features 3,700 lbs. of pull force and is designed to handle both 3/16” and 1/4″ steel and aluminum structural rivets.

DataTouch Launches Data Pump Manager for Auto Body Shops

The Data Pump Manager is designed to share only the correct estimate and needed repair information to conduct business with each service provider.