Renegade Model TMB 5500 Automatic Top Load Solvent-Free Parts Washer

Renegade Model TMB 5500 Automatic Top Load Solvent-Free Parts Washer

The Renegade Model TMB-5500 Parts Washer Solvent-Free System functions like a dishwasher to clean a broad range of parts and components covered with grease, oil or lubricants.

Renegade Parts Washers has announces the release of a new automatic top load parts washing system that will enable body shop, fleet maintenance and engine repair operations to boost their level of quality repair.

The Renegade Model TMB-5500 Parts Washer Solvent-Free System functions like a dishwasher to clean a broad range of parts and components covered with grease, oil or lubricants. With speedy cycle times, the wash zone features a spray manifold to deliver high pressure force and high temperature cleaning performance consistent with manufacturers’ parts quality compliance, warranty and certification programs.

Automation features include PLC programmable wash cycle timer and heater timer. Increased automation allows the operator to multi-task, and reduced labor costs impact cost of operations. Rugged stainless-steel construction means low maintenance but delivers high performance batch after batch.

The Renegade TMB-5500 Parts Washers are designed to work with specially formulated, solvent-free detergents for maximum cleaning without residue buildup and lower environmental impact. The Renegade detergent wash medium discharges zero hazardous waste to the environment; it’s considered industrial waste in the same category as your mop water. Furthermore, there are no harmful VOCs, and zero solvent vapors eliminate solvent odors.

For more information, call (800) 774-7900 or visit www.renegadepartswashers.com.

You May Also Like

Florida Pneumatic Introduces New AIRCAT 6420 1/4″ Air Hydraulic Riveter

The new AIRCAT 6420 1/4” Air Hydraulic Riveter features 3,700 lbs. of pull force and is designed to handle both 3/16” and 1/4″ steel and aluminum structural rivets.

Florida Pneumatic Manufacturing Corp. has announced the new AIRCAT 6420 1/4” Air Hydraulic Riveter, which features 3,700 lbs. of pull force and is designed to handle both 3/16” and 1/4" steel and aluminum structural rivets, as well as 3/16” and 1/4” Monobolts.

This professional tool is designed for continuous use and features a convenient on/off switch for Florida Pneumatic's patented “mandrel vacuum collection system.” The removable mandrel collection bottle can also be quickly removed and emptied. Tips included are 3/16”, 1/4", 3/16” Monobolt and 1/4" Monobolt.

BendPak Announces New Longer-Lasting LITESTIX

The LITESTIX portable LED work light now provides up to seven hours of continuous use on one charge.

DataTouch Launches Data Pump Manager for Auto Body Shops

The Data Pump Manager is designed to share only the correct estimate and needed repair information to conduct business with each service provider.

Kaeser Announces New Oil-Water Separator

The AQUAMAT i.CF employs an active process using compressed air to more evenly distribute condensate throughout the filter.

TOPDON USA Unveils New Thermal Imaging Camera

The new TS001 thermal imaging camera is equipped with advanced measurement and observation modes for precise temperature readings and intuitive insights into heat distribution.

Other Posts

Autel Releases the AC Elite G2 Charging Series 

The charger can be used in various settings, such as public commercial parking areas, residential areas, hospitals and service areas.

Snap-on Unveils New Speed Demon EPIQ 68″ Roll Cab

The new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68″ Roll Cab features next-level organization, durability, security and mobility.

Florida Pneumatic Releases AIRCAT 6335 Engraving Pen

The AIRCAT 6335 Engraving Pen features a carbide stylus and powerful 1/8” stroke piston design for consistent and trouble-free operation.

Hunter to Exhibit New HawkEye XL Aligner at MATS

New commercial alignment system offers speed, versatility and ease of use.