The .01 Micron SuperStar Filter is designed to provide clean, dry, compressed air resulting in the removal of any vapors and contaminates down to .01 micron. It’s a four-stage filtration system that has a .01 micron rating, with flow ranges of 50 SCFM, 75 SCFM or 100 SCFM, and can handle pressure ratings of up to 250 PSI. It works best when it is installed at, or near, the point of use. The first- and second-stage filters remove moisture, liquids, dust, rust, scale and other contaminants to 5 microns. An automatic float drain under the second-stage filter opens and expels all collected liquids whenever an ounce or more is present. It’s fully automatic with no continuous air loss. The third and fourth stages remove any remaining particles down to .01 microns as well as absorbing any remaining vapors.It includes a differential pressure gauge and comes with mounting brackets. The differential pressure gauge provides a visual indication of required maintenance which is easily done by installing the appropriate service kit. No need to remove the unit from the compressed air system. For more information, call Walmec North America at (866) 764-8377 or visit www.walmecna.com.