The ST-01 Paint Sample Dryer is designed to produce rapid drying of both waterborne basecoats and urethane clears and single-stage coatings. The ST-01 can use infrared, air movement or both to obtain a fast drying result. Before its launch, the ST-01 was tested on high-performance waterborne basecoats and achieved drying results in as little as 90 seconds. Clearcoats are reported to be curing in only three minutes. To learn more about the B-TEC Systems infrared products or to be considered as a distributor, contact Jim Stubert at [email protected] or (480) 621-5304. Visit the website at www.bteccleaners.com.