Tsunami Releases New 15 SCFM Membrane Dryer

Tsunami Releases New 15 SCFM Membrane Dryer

The Tsunami 15 SCFM Membrane Dryer assures that your application is supplied with quality air to meet the specific air cleanliness specification.

tsunami-membrane-dryer

Byproducts of compressed air such as water, oil, vapors and humidity can cause severe damage to your business or operation. The Tsunami 15 SCFM Membrane Dryer assures that your application is supplied with quality air to meet the specific air cleanliness specification. Incoming air enters the first stage – water separator, where water and particulates are removed down to 10 micron. The air then travels through the second stage – oil coalescing filter, where oil aerosols are filtered down to .001 ppm and particulates are trapped down to .01 micron. Air then enters the third stage – activated carbon filter, where oil vapor is removed down to .003 ppm. The pre-treated air finally migrates through the Membrane Dryer, where water vapor is removed from the air. This system can provide dew points down to -80°F. The air exits through the outlet regulator. Tsunami filtration systems are available in a variety of packages and draining options to meet the needs of your application. For additional assistance or to place orders, call (800) 782-5752 or visit www.tsunami.us.com.

Tsunami Compressed Air Solutions
Phone: 800-782-5752Fax: 763-295-6601Contact: Chase Marshall

You May Also Like

BendPak Announces New Longer-Lasting LITESTIX

The LITESTIX portable LED work light now provides up to seven hours of continuous use on one charge.

BendPak has introduced the new LITESTIX LS36SMDX portable LED work light, now powered by a higher-capacity rechargeable battery that provides up to seven hours of continuous use on one charge. It is designed to train task lighting wherever it’s needed without cords getting in the way. The light boosts visibility where general lighting isn’t strong enough, such as inside engine compartments, vehicle interiors and underneath lifts, as well as when work is underway at night.

DataTouch Launches Data Pump Manager for Auto Body Shops

The Data Pump Manager is designed to share only the correct estimate and needed repair information to conduct business with each service provider.

Kaeser Announces New Oil-Water Separator

The AQUAMAT i.CF employs an active process using compressed air to more evenly distribute condensate throughout the filter.

TOPDON USA Unveils New Thermal Imaging Camera

The new TS001 thermal imaging camera is equipped with advanced measurement and observation modes for precise temperature readings and intuitive insights into heat distribution.

Autel Releases the AC Elite G2 Charging Series 

The charger can be used in various settings, such as public commercial parking areas, residential areas, hospitals and service areas.

Other Posts

Snap-on Unveils New Speed Demon EPIQ 68″ Roll Cab

The new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68″ Roll Cab features next-level organization, durability, security and mobility.

Florida Pneumatic Releases AIRCAT 6335 Engraving Pen

The AIRCAT 6335 Engraving Pen features a carbide stylus and powerful 1/8” stroke piston design for consistent and trouble-free operation.

Hunter to Exhibit New HawkEye XL Aligner at MATS

New commercial alignment system offers speed, versatility and ease of use.

Dent Fix Introduces New Soft Shock Mallet

The new DF-SM76 soft-shock mallet can apply a strong striking force and avoid damaging or scratching parts.