New Forward Lift F10 Two-Post Lift Combines Versatility with Economy

New Forward Lift F10 Two-Post Lift Combines Versatility with Economy

The F10 two-post lift comes with one three-stage arm and one two-stage arm on each column, enabling technicians to properly lift a wide range of cars, light trucks, SUVs and vans.

forward-lift-f10The new Forward Lift F10 10,000 lb. capacity two-post lift gives shop owners a versatile two-post lift, designed to service a wide variety of vehicles for a low purchase price. The F10 two-post lift comes with one three-stage arm and one two-stage arm on each column, enabling technicians to properly lift a wide range of cars, light trucks, SUVs and vans.

Third-party tested and certified by the Automotive Lift Institute (ALI) to meet industry safety and performance standards, the Forward Lift F10 two-post lift is available through most national auto parts retailers, as well as from more than 100 Forward Lift authorized distributors across North America.

Symmetric lifting is preferred for most trucks, SUVs and vans because it centers the vehicle load between the lift’s columns to maximize lifting capacity. Lighter cars can be better serviced using an asymmetric lift. This positions the vehicle toward the rear of the bay to prevent its doors from contacting the lift’s columns when opened, and provides easier access to the interior of the car and its under-dash components.

The Forward Lift F10 has one three-stage arm and one two-stage arm on each column, which lets technicians make the appropriate configuration choice for each vehicle. The rear arm has a maximum reach of 58 inches toward the back of the vehicle, while the shorter front arm can be angled toward the middle of the bay. This asymmetric-like setup supports the vehicle’s center of gravity and places the vehicle’s doors clear of the lift’s columns. For symmetric lifting of larger vehicles, the technician simply shortens the rear arm and angles the front arm more toward the front of the bay.

The F10 features Forward Lift’s unique Direct-Pull Lift Technology, which replaces common push cylinders in the lift columns with direct-pull cylinders. This design protects the cylinder rod inside the carriage when lowered, and inside the cylinder housing when raised. This technology also provides the best mechanical advantage against side loading, one of the most common causes for cylinder leaks.

Additional features on the Forward Lift F10 two-post lift include a single-point lock release for easy lowering of the vehicle, low-profile 3-5/8 inch rubber-pad swivel adapters, and extra height extensions (3-1/2 and 5 inches) for reaching vehicle manufacturer-recommended pick-up points.

For more information about the new Forward Lift F10 two-post lift, visit www.forwardlift.com/Car-Lifts/2-Post-Lifts/F10-Two-Post-Lift/, contact your local Forward Lift distributor or call (800) 423-1722.

You May Also Like

Auto Magic Launches Liquid Clay Decon

Liquid Clay Decon is a spray-on and rinse-away, color-changing and pH-neutral exterior decontaminant that is safe on all exterior substrates.

Auto Magic has announced the launch of their latest product, Liquid Clay Decon, a spray-on and rinse-away, color-changing and pH-neutral exterior decontaminant that is safe on all exterior substrates. This product breaks down the harshest contaminants that embed themselves on a vehicle.

"This product will be the first color-changing wheel and paint decontaminant that Auto Magic has developed," said Andrew Schirmer, product manager for Auto Magic. "This is the first truly spray-on and rinse-away product of its kind."

Florida Pneumatic Introduces New AIRCAT 6420 1/4″ Air Hydraulic Riveter

The new AIRCAT 6420 1/4” Air Hydraulic Riveter features 3,700 lbs. of pull force and is designed to handle both 3/16” and 1/4″ steel and aluminum structural rivets.

BendPak Announces New Longer-Lasting LITESTIX

The LITESTIX portable LED work light now provides up to seven hours of continuous use on one charge.

DataTouch Launches Data Pump Manager for Auto Body Shops

The Data Pump Manager is designed to share only the correct estimate and needed repair information to conduct business with each service provider.

Kaeser Announces New Oil-Water Separator

The AQUAMAT i.CF employs an active process using compressed air to more evenly distribute condensate throughout the filter.

Other Posts

TOPDON USA Unveils New Thermal Imaging Camera

The new TS001 thermal imaging camera is equipped with advanced measurement and observation modes for precise temperature readings and intuitive insights into heat distribution.

Autel Releases the AC Elite G2 Charging Series 

The charger can be used in various settings, such as public commercial parking areas, residential areas, hospitals and service areas.

Snap-on Unveils New Speed Demon EPIQ 68″ Roll Cab

The new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68″ Roll Cab features next-level organization, durability, security and mobility.

Florida Pneumatic Releases AIRCAT 6335 Engraving Pen

The AIRCAT 6335 Engraving Pen features a carbide stylus and powerful 1/8” stroke piston design for consistent and trouble-free operation.