Recently released results from a survey by collision industry trainer and consultant Mike Anderson have found exactly “who pays for what” in terms of frame and mechanical procedures. Just under 61 percent of shops surveyed said they are paid “always” or “most of the time” for removing coatings from pinchwelds prior to mounting the vehicle on a frame machine when it’s required for the repair.
But Anderson said that percentage, from the latest “Who Pays for What?” survey results available now, isn’t high enough.
“In my opinion, that 61 percent should be 100 percent,” said Anderson, president of Collision Advice.
Anderson noted that some automakers do not approve of mounting or anchoring in the pinchweld area at all, and said shops should always follow manufacturer recommendations. But when mounting using the pinchwelds, he said, removal of the coatings is a must.
“I have not found any vehicle manufacturer or any frame equipment company that says it’s OK to secure a fixture clamp to pinchwelds without first removing all undercoating and seam sealer,” he said. “If this isn’t done, it increases the likelihood that the vehicle can slip when you are pulling it, causing further damage or adversely impacting the accuracy of the measurements. So those coatings need to be removed in order to perform a proper and safe repair.”
The pinchweld information is just one of hundreds of findings revealed in the second quarterly “Who Pays For What?” survey report. This latest survey examines how often shops are charging – and being paid – for 20 different “not-included” repair procedures related to structural/frame and mechanical operations. (The first survey focused on refinish-related “not-included” operations.) Nearly 700 shops responded to the national survey.
The survey also found that State Farm and USAA appear to understand the need for removing coatings from pinchwelds better than other insurers; more than 80 percent of their DRP shops report being paid “always” or “most of the time” to perform the procedure, compared to less than 55 percent of Progressive and GEICO DRP shops.
“I would encourage anyone who is not being paid for this to research it through the OEMs, I-CAR or any frame equipment companies to ask if it is OK to mount a fixture clamp over a pinchweld covered with undercoating or seam sealer,” Anderson said. “They will find that the answer is a clear no. Shops need to understand that their technicians must be doing this.”
Anderson said the quarterly surveys help raise awareness of not-included items and operations that shops may be doing but not itemizing on estimates.
“The surveys will help shops understand what these operations are, and whether other shops seek and receive compensation for them – or if they truly are ‘the only one,’” Anderson said.
The 51-page report of the second survey findings on frame and mechanical operations is now available by clicking here. Also available is a 62-page report on the first survey results released earlier this year for refinish-related not-included procedures.
Shops can also visit that website to sign up to take the next quarterly survey, which opens in October.
