AAA Illuminates Dangers of Driving with Cloudy Headlights - BodyShop Business

AAA Illuminates Dangers of Driving with Cloudy Headlights

New research from AAA reveals that clouded or yellowed headlights generate only 20 percent of the amount of light that new headlights do, leading to dangerous nighttime driving conditions.

New research from AAA reveals that clouded or yellowed headlights generate only 20 percent of the amount of light that new headlights do, leading to dangerous nighttime driving conditions. This decrease is caused by sunlight damage to protective plastic coatings, resulting in discoloration that considerably diminishes the headlight’s ability to provide adequate light on dark roadways. With 50 percent of crashes occurring at night, AAA urges drivers to check their headlights for signs of deterioration and invest in new headlights or, at a minimum, a low-cost service to boost the safety of driving after dark.

“Walk through any parking lot and it is evident that deteriorated headlights are a problem for most vehicle owners,” said Greg Brannon, director of Automotive Engineering and Industry Relations for AAA. “Headlights on the road in the U.S., even when new, don’t produce a sufficient amount of lighting, so any reduction in performance is a real safety issue.”

AAA examined the impact deterioration can have on the amount of light produced by conducting research using an accredited laboratory to test headlights from two popular sedans, approximately 11 years in age. Results from the degraded headlights were measured against new headlights to quantify the amount of light produced for each. All testing was done in accordance with the Federal Motor Vehicle Safety Standard 108 as set forth by the Department of Transportation (DOT).

Research revealed that deteriorated headlights, when used on low beam, provided just 22 percent of the amount of light a new headlight does when operating at full capacity. AAA also examined the effects that replacing or restoring a headlight can have on improving the amount of light produced. Replacing headlights with original equipment manufacturer parts is the most effective method to restore light output back to 100 percent.

AAA states that aftermarket parts also performed well, restoring light output between 83 and 90 percent, however these did fail to meet certain requirements for light intensity and were found to be more likely to produce glare for oncoming traffic. Restoring headlights, while the most cost-effective option, offered less of an improvement in light output than replacement. Professional and DIY restoration returned light output back to approximately 70 percent. Both restoration methods, however, produced more glare than is acceptable, according DOT criteria.

Compounding the problem of driving with deteriorated headlights is the fact that U.S. headlights have significant shortcomings. Previous AAA research found that halogen headlights fail to safely illuminate unlit roadways at speeds as low as 40 mph, with high-beam settings offering only marginal improvements. Even the most advanced headlights tested illuminated just 40 percent of the sight distances that the full light of day provides. By not maintaining headlights, drivers are unknowingly operating in dangerously dim conditions.

“Driving at night with headlights that produce only 20 percent of the light they did when new, which is already subpar, is a risk drivers shouldn’t take,” said Brannon. “Especially when there are convenient and inexpensive solutions that can dramatically improve lighting performance.”

Unlike batteries or tires, most drivers are not in the habit of routinely inspecting their headlights. AAA suggests drivers check their headlights for changes in appearance such as yellowing or clouding and if the bulb is difficult to see, it is time to have the lenses replaced or restored as soon as possible. AAA recommends replacement since this method offers the most improvement in the amount of light produced.

You May Also Like

ALI Announces Lifting Points Guide Now Available in Digital and Print

Easily find OEM-recommended lifting points to properly lift cars, trucks and SUVs.

The Automotive Lift Institute (ALI) announced it is offering the 2024 edition of its popular Lifting Points Guide, "Vehicle Lifting Points for Frame Engaging Lifts," for the first time as a digital product or bundle of print and digital.

One of the most important steps when using a frame-engaging car lift like a two-post lift is to position the lift adapters only at the OEM-recommended lifting points. Failing to follow this guidance and instead guessing where to position the adapters may result in the vehicle getting damaged or falling from the lift.

NTSB Chair Praises NHTSA Action on AEB Final Rule

Jennifer Homendy lauded the new standard requiring all new passenger cars and light trucks to have automatic emergency braking and pedestrian AEB systems.

Lucid Group Debuts New EV with 516-mile Range

Lucid claims the 2024 Air Grand Touring starting at $109,900 is the longest-range EV available today.

2024 SEMA Show Registration Now Open

Representatives from more than 2,000 companies prepare to select their exhibit space during priority space selection April 29-May 15.

Repairify Appoints New VP of General Automotive Repair Markets

Industry veteran Ben Johnson will lead asTech Mechanical’s business development and product management teams.

Other Posts

ALLDATA Adds Repair Planner to Collision Repair Platform

Repair Planner automates the repair planning process and helps shops plan necessary inspections and structural repairs with OEM accuracy.

AkzoNobel Announces New Business Development Manager

Brian Martin has joined AkzoNobel’s Automotive & Specialty Coatings division as business development manager for North America.

Longtime Family Collision Repair Business Joins Forces with CARSTAR

JC Auto Rebuilders of Rockford, Ill., has rebranded as CARSTAR Team JC Auto Rebuilders.

Lee’s Auto Body: Established in 1916

Lee’s Auto Body was established in 1916 in Long Island City, N.Y., by Lee Heimuller, a blacksmith.