AirPro Diagnostics

AirPro Diagnostics Introduces Remote Solution for Pre- and Post-Repair Scanning

The AirPro is a scan tool equipped with OEM-validated, vehicle communication interfaces that connect directly to the vehicle for real-time functionality.

airpro-v2The AirPro is a state-of-the-art, high-level scan tool equipped with OEM-validated, vehicle communication interfaces that connect directly to the vehicle for real-time functionality (as designed by scan tool developers and manufacturers). This method allows the use and functionality of OEM diagnostic software in conjunction with the highest levels of aftermarket scan tool functionality available. APD’s diagnostic specialists wirelessly remote into the AirPro and perform the required procedures as dictated by OEM and industry standards. When trouble is found, APD’s diagnostic technicians provide guided technical assistance and support to correct the condition toward the desired outcome and then deliver a detailed report, including OEM requirements and recommendations.

The surge of technology introduced into vehicles has brought awareness of advanced level diagnostics, calibrations and programming to the forefront of the collision industry. This has reached a critical level for vehicle manufacturers, shops, technicians, insurers, tool manufacturers and anyone else involved in collision repairs. Recently, several OEMs have issued position statements that pre- and post-collision repair scans are required or strongly recommended. This process will undoubtedly reduce overall costs and increase customer satisfaction to the benefit of all stakeholders. It’s a value-added process that leads to safer vehicles after repairs, improved insurance policy retention and OEM brand loyalty from customers.

For more information, visit airprodiagnostics.com.

You May Also Like

Kaeser Announces New Oil-Water Separator

The AQUAMAT i.CF employs an active process using compressed air to more evenly distribute condensate throughout the filter.

Kaeser Compressors has announced its new oil-water separator, designed to maximize efficiency, simplify maintenance and seamlessly integrate with modern industrial environments.

Unlike traditional gravity-fed systems, the AQUAMAT i.CF employs an active process using compressed air to more evenly distribute condensate throughout the filter. This approach ensures environmental compliance while maximizing utilization of the filter media for longer service intervals. Ergonomic design and drip-proof cartridges offer fast, no-mess servicing.

TOPDON USA Unveils New Thermal Imaging Camera

The new TS001 thermal imaging camera is equipped with advanced measurement and observation modes for precise temperature readings and intuitive insights into heat distribution.

Autel Releases the AC Elite G2 Charging Series 

The charger can be used in various settings, such as public commercial parking areas, residential areas, hospitals and service areas.

Snap-on Unveils New Speed Demon EPIQ 68″ Roll Cab

The new KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68″ Roll Cab features next-level organization, durability, security and mobility.

Florida Pneumatic Releases AIRCAT 6335 Engraving Pen

The AIRCAT 6335 Engraving Pen features a carbide stylus and powerful 1/8” stroke piston design for consistent and trouble-free operation.

Other Posts

ADAS Calibrations: Lessons Learned

When navigating the complexity and challenges of ADAS, apply the lessons you’ve learned … and be open to learning more.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene, automotive content video producer at Babcox Media, discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.

TEXA Releases IDC5 CAR 76.5.0 Software Update

IDC5 CAR 76.5.0 includes the update of 37 makes, including electric and hybrid vehicles.

ADAS Calibration Training: Back to School

Jason Stahl talks with Kurt Fenzel of I-CAR on his experience teaching hands-on ADAS calibration courses to the collision industry.